| 1.What
is the need?
Contamination in cotton has become a
crucial factor along with production and quality. Removal
of contamination has matured into necessity considering the
growing demand of consumer, although safe practices are involved
from cultivation to spinning there is much need to control
the level of contamination-cleaning machine has become a critical.
2. What is the Benefit?
a) Minimizing manual Labour b)
Possibility to match equal efficiency c) Simple to
manage d) improvement in consistency of removal
3. How many machines are
required?
The Quantity of machines is a crucial
question you need at least one machine between each Blow Room
line connected to cards. However improvement in cleaning is
possible with additional machines.
4.Does more machines lead
to better clearing?
Certainly! More machines raise the chances
of detection since scanning possibility is increased.
5.How does it work?
All the cotton is passed through the
machine for scanning. Contaminations are exposed to the cameras
/ sonic sensors for detection and Air jets for removal. Whenever
contaminations are detected it is effectively presented for
elimination by Air jets.
6.What type of contamination
it can detect?
The machine responds for White colorless
polypropylene or synthetic materials. Colored contamination
like jute, lengthy thread etc.,
7.What is the ideal location
for the machine to be installed?
The performance is better after a fine
beater whose wide rectangular duct enhances the separation
of cotton in smaller tufts. The contamination that is exposed
better offers maximum clearing.
8.What is the distance
required?
A minimum of 3750 mm is required between
the machines to insert the Vetal scan. A clearing Headroom
height of 3440 mm is required.
9.How the contaminations
are collected?
The contaminations ejected out by Air
jets are transferred through a suction fan to a bag along
with few cotton lint.
10.What is the production
throughput possible?
A production throughput of 1000 kgs
is possible.
11.If the second machine
has to be installed for improved clearing where it has to
located?
Many customers choose one more additional
machine after the first cleaner. Even though the cotton is
not opened well at this point bigger contamination are detected
earlier itself. Here the machine can process 4 different assortments
of cotton and change its parameters on receiving a ‘Cotton
flow Change’ information. |
